Analysis and Simulation of the Signals Transmission in the DVB-H/SH Standards

Tato disertační práce se zabývá analýzou, simulací a měřením zpracování a přenosu signálů digitální televize pro příjem mobilního TV vysílání ve standardech DVB-H a DVB-SH. Tyto standardy vycházejí z předpokladu, že příjem signálu je charakterizován modely přenosových kanálů s vícecestným šířením. Tyto, tzv. únikové kanály, jsou charakterizovány hlavně zpožděním a ziskem jednotlivých cest. V závislosti na dalších parametrech (rychlost přijímače, Dopplerovské spektrum), je možné rozdělit únikové kanály do třech hlavních skupin: mobilní, přenosné a fixní. Dá se předpokládat, že v různých modelech kanálů bude přenášený signál různě ovlivněn. Proto je potřebné najít optimální parametry systémů (DVB-H/SH) pro kvalitní příjem vysílaných služeb mobilní televize, což je hlavním cílem této disertační práci. Pro tento účel byly vytvořeny dvě vhodné aplikace (jedna pro DVB-H a jedna pro DVB-SH) s GUI v prostředí MATLAB, které umožňují simulovat a analyzovat míru zkreslení signálu v případě mobilních, přenosných a fixních scénářů přenosu. Navíc, tyto aplikace obsahují i druhý samostatný simulátor pro nastavení a modifikaci parametrů jednotlivých přenosových cest. Díky tomu je možné zhodnotit vliv parametrů celého systému a kanálových modelů na dosaženou chybovost (BER a MER) a kvalitu přenosu. Ve všech přenosových scénářích (v závislosti na poměru C/N) byly získané, vyhodnocené a diskutované zkreslení signálů. Navíc, u standardu DVB-H, všechny získané výsledky ze simulací byly ověřeny měřením. Rozdíly mezi dosaženými výsledky (simulace a měření) byly rovněž podrobeny diskuzi. Tuto disertační práci je možné rozdělit do čtyř hlavních částí. První část disertační práce se zabývá rešerší současného vývoje v oblasti digitálního televizního vysílání na mobilní terminály ve standardech DVB-H/SH. Na konci této části jsou jasně popsány cíle této disertační práce. Druhá část práce je zaměřená na stručný popis blokového diagramu vysílačů v obou standardech DVB-H/SH. Dále jsou stručně popsány modely přenosových kanálů, které se používají pro modelování přenosu signálu. Stručný popis vytvořených aplikací, i s vývojovým diagramem, které jsou vhodné pro simulaci a analýzu přenosu v DVB-H/SH, jsou popsány v třetí části práce. Čtvrtá a nejdelší část této disertační práce se zabývá vyhodnocením získaných výsledků ze simulací a měření.This dissertation thesis deals with the analysis, simulation and measurement of the signal processing and transmission in DVB-H and DVB-SH standards. These standards are based on the assumption that signal reception is characterized by the transmission channels with echoes. These, so called fading channels, are mainly characterized by the path delays and path losses. Depending on the other, additional features (speed of the receiver, Doppler spectrum, etc.), it can be possible divided these channels onto three main groups: mobile, portable and fixed. Of course, signal transmission in different transmission channel models are affected differently. Therefore, it is needed found the optimal system parameters in both, DVB-H and DVB-SH standards, for the quality reception of the broadcasted mobile TV services, which is the main goal of this thesis. For this purpose, two appropriate applications (one for DVB-H and one for DVB-SH) with GUI were created in MATLAB, which enable simulated and analyzed the signal distortions in mobile, portable and fixed transmission scenarios. Moreover, these applications also contain a second application with GUI for the easy set and modification of the parameters of the used channel models. Therefore, it is possible to evaluate the effect of parameters of whole system and channel models on the achieved error rate (BER and MER) and quality of the transmission. In all mentioned transmission scenarios, the signal distortions (depending on the Carrier-to-Noise ratio) were obtained, evaluated and discussed in this dissertation thesis. Furthermore, in case of DVB-H, all obtained results from the simulations, were verified by the measuring. Differences between the obtained results (simulation and measuring) are also discussed. This dissertation thesis can be divided into four main parts. The first part of this dissertation thesis, after the short introduction, deals with present state-of-the-art and literature survey in mobile broadcast DVB-H/SH standards. At the end of this part are clearly outlined the main aims of this dissertation thesis. Second part is focused on the brief description of the functional block diagram of transmitters in both, DVB-H/SH standards. Furthermore, there are briefly described the transmission fading channel models, which are commonly used for the modeling of the signal transmission. The brief description of program applications with flowcharts, appropriate for the simulation of the transmission in the DVB-H/SH standards, are presented and described in the third part of this thesis. Finally, the fourth and longest part of this thesis is focused on the evaluation and comparison of obtained results from the simulations and measurements.

Geochemie silně siderofilních prvků a izotopů Re-Os karbonatitů a přidružených alkalických hornin vybraných lokalit Indie

Karbonatity jsou horniny extruzivního a intruzivního typu, které obsahují minimálně 50 % karbonátových minerálů, pocházejících převážně ze svrchního pláště. Reprezentují potencionální ekonomický zdroj, jakožto zdroj prvků platinové skupiny, tak jako je tomu v Palawboře v Jižní Africe nebo v Ipanamě v Brazílii. Toto je první studie, která přináší informace o koncentracích silně siderofilních prvků (HSE) spolu s izotopickými poměry 187 Os/188 Os pro karbonatity, silikokarbonatity a přidružené alkalické horniny (pyroxenit, syenit, monzogabro a tonalit) z dvou neoproterozoických (~ 800 milionů let) oblastí ze Samalpatti a Sevatturu, regionu Tamil Nadu v jižní Indii. Data byla pořízena standartní metodou za pomoci rozložení vzorků v Carius Tubes. Separace Os probíhala pomocí chlorofrmu (CHCl3), následovaná mikrodestilací a separací Ir, Ru, Pt a Pd za pomoci iontové chromatografie. Výsledky ukazují, že karbonatity ze Samalpatti a ze Sevatturu jsou charakteristické nízkými koncentracemi HSE, nižšími než ostatní mafické horniny derivované z pláště, jako jsou bazalty nebo komatiity. Suprachondritické poměry OsN/IrN mohou napovídat, že karbonatity jsou schopny koncentrovat nezanedbatelné množství Os. Kvůli vysokým, nejednotným poměrům 187 Os/188 Os předpokládáme, že zdroj karbonatitové taveniny byl vysoce...Carbonatites are intrusive and extrusive rocks with content of carbonate minerals > 50% predominantly derived from upper mantle. They represent a potential economical source for platinum- group elements as can be seen on actively mined sites like Phalaborwa in South Africa or Ipanema in Brazil. The first complete dataset for highly siderophile element (HSE) abundances along with their 187 Os/188 Os compositions for carbonatites, silicocarbonatites and associated alkaline rocks (pyroxenite, syenite, monzogabbro and tonalite) from two Neoproterozoic (~ 800 Ma) suites from Samalpatti and Sevattur, Tamil Nadu region in south India is presented. The data were obtained by a standard methods in involving decomposition of samples in Carius Tubes, Os separation by CHCl3 following microdistillation and Ir, Ru, Pt, Pd isolation by anion exchange chromatography. The data show that carbonatites from Samalpatti and Sevattur are characterized by very low HSE contents, lower than other mantle-derived mafic melts such as basalts or komatiites. Suprachondritic OsN/IrN ratios might suggest that carbonatites are able to concentrate not negligible amount of Os. Due to high, non-uniform 187 Os/188 Os ratios, we suggest that the source of carbonatitic melts was largely heterogeneous with high contribution of crustal...Institute of Geochemistry, Mineralogy and Mineral ResourcesÚstav geochemie, mineralogie a nerostných zdrojůPřírodovědecká fakultaFaculty of Scienc

Applying the principles of sustainability in cultural heritage objects care: the case study of cuneiform tablet

This paper discusses application of sustainability principles in the care of museum’s collections and more specifically, in the case of cuneiform tablet collection. The principles of sustainability are inherently present in the idea of memory institutions and their rules of collection preservation. This paper shows how digitalization of collections and the new ways of data storage are well suited for reaching goals of preservation of the collection for future and simultaneously widening access to the collection for those interested. Various methods and approaches employed to achieve protection and opening the collection are presented

Influence of mycotoxins in barley monodiets on growth performance and rats liver histology

The presence of mycotoxins in animal feed cause health disorders and can also contribute to other factors such as stress, lack of nutrition, infectious agents etc. The aim of this article was to study effect of feed ration contaminated with mycotoxins on liver histology and live weight of laboratory rats. 15 pieces of laboratory rats were divided into 3 groups (A, B, C). The rats in first group (A) fed with part of 30% mycotoxin-contaminated barley, in second group (B were fed with 60% and in control group (C) were fed without mycotoxin-contaminated barley. Content of deoxynivalenol (DON) was 9634 µg/kg and content of zearalenone (ZEN) was 2192 µg/kg. Barley monodietus were given rats in all groups to induce a nutritional imbalance. The aim of this study was to monitor the effect of mycotoxins and nutritional imbalances on weight gains and liver histology. The question is, "will the presence of mycotoxins in feed dose increase negative effect of a monodiets on health status?" No significant differences were found between the observed parameters. The presence of mycotoxins did not aggravate the negative effect of the monodiets on liver histology of the experimental rats.O

Electronically Reconfigurable and Tunable Fractional-Order Filter Using Resonator Concept and Feedforward Path for Low-Frequency Tone Signalization

A novel electronically reconfigurable fractional-order filter allowing independent electronic frequency tuning and switchless change of the transfer response by a single parameter between standard band-pass, inverting all-pass response and special type band-reject response is presented in this work. The differences between these special transfer characteristics and standard features consist in magnitude and phase response behavior. Inverting amplification or attenuation is also available. The filter has tested frequency range between 1 Hz and 100 kHz. The proposed fractional-order filter (using two fractional-order element having equivalent capacity 8.7 uF/sec^1/4, =3 /4) tunability yields one-decade range approximately between 10 Hz and 100 Hz by transconductance between 0.19 and 1.1 mS (fractional-order design helps with reduction of driving force less than one decade). The application example in frequency/phase detector (operationability around center frequency 100 Hz - between 50 and 180 Hz) and further signaling frequency detecting system for frequency shift keying demodulator offers maximal detectable voltage (about 300 mV) for alignment (zero phase shift) of the signals of the same frequency (center frequency of the proposed filter in inverting all-pass mode). It also offers an interesting application in frequency shift keying demodulation process (or for identification/signalization purposes of certain frequencies) by usage of a simple additional comparator generating clear output state. Cadence simulations as well as experimental tests using integrated cells of special multipliers fabricated in ON Semiconductor 0.35 m I3T25 CMOS process confirm operationability of the proposed concept as well as simple application of special response of the filter for phase/frequency detection and demodulation purposes

Arbitrarily Tunable Phase Shift in Low-Frequency Multiphase Oscillator

A special electronically tunable multiphase oscillator with arbitrarily and continuously adjustable phase shifts is introduced. Our design assumes to set the phase around the asymptotical limit of 180.. These features cannot be easily achieved in a standard way, i.e., any simple single-phase oscillator supplemented by a first-order adjustable all-pass (AP) section (shifter). The proposed design uses an electronically linearly tunable quadrature oscillator with a frequency range from 0.98 up to 12.54 kHz. It also offers multiples of 45. as the initial setting of the phase shift tuning region. The example of operation shows the adjustment of the phase shift at a specific frequency (10 kHz) within the range of +/- 45 degrees. and around -180 degrees, -135 degrees, and -90 degrees. This variability is not available in standard cases without the use of several AP sections. The current value of the phase shift of the presented oscillator is electronically controlled and does not influence the oscillation frequency and condition of oscillation. Output levels of produced signals are not influenced by this tuning process and are in the range of several hundreds of mV. Two applications of the oscillator are proposed. The first one focuses on low-bitrate modulation systems [phase shift keying (PSK)] while in the second one, our circuit represents a source of phase-adjustable signals in acoustic experiments. Discrete passive elements and active devices (special multipliers having current output terminals, unity-gain differential voltage buffers) fabricated in 0.35 mu m I3T25 ON Semiconductor 3.3 V CMOS process are used in experimental verification

CMOS Current Feedback Operational Amplifier-Based Relaxation Generator for Capacity to Voltage Sensor Interface

This paper presents a simple relaxation generator, suitable for a sensor interface, operating as a transducer of capacitance to frequency/period. The proposed circuit employs a current feedback operational amplifier, fabricated in I3T25 0.35 m ON Semiconductor CMOS process, and four passive elements including a grounded capacitor (the sensed parameter). It offers a low-impedance voltage output of the generated square wave. Additional frequency to DC voltage converter offers output information in the form of voltage. The experimental capacitance variation from 6.8 nF to 100 nF yields voltage change in the range from 21 mV to 106 mV with error below 5% and sensitivity 0.912 mV/nF evaluated over the full range of change. These values are in good agreement with simulation results obtained from the Mathcad model of frequency to DC voltage transducer passive circuit

Integrated Building Cells for a Simple Modular Design of Electronic Circuits with Reduced External Complexity: Performance, Active Element Assembly, and an Application Example

This paper introduces new integrated analog cells fabricated in a C035 I3T25 0.35-m ON Semiconductor process suitable for a modular design of advanced active elements with multiple terminals and controllable features. We developed and realized five analog cells on a single integrated circuit (IC), namely a voltage differencing differential buffer, a voltage multiplier with current output in full complementary metal–oxide–semiconductor (CMOS) form, a voltage multiplier with current output with a bipolar core, a current-controlled current conveyor of the second generation with four current outputs, and a single-input and single-output adjustable current amplifier. These cells (sub-blocks of the manufactured IC device), designed to operate in a bandwidth of up to tens of MHz, can be used as a construction set for building a variety of advanced active elements, offering up to four independently adjustable internal parameters. The performances of all individual cells were verified by extensive laboratory measurements, and the obtained results were compared to simulations in the Cadence IC6 tool. The definition and assembly of a newly specified advanced active element, namely a current-controlled voltage differencing current conveyor transconductance amplifier (CC-VDCCTA), is shown as an example of modular interconnection of the selected cells. This device was implemented in a newly synthesized topology of an electronically linearly tunable quadrature oscillator. Features of this active element were verified by simulations and experimental measurements

Readout for simple and precise analog acoustic impact initialization

An economic concept of acoustic shock wave sensing readout system for simple computer processing is introduced in this work. Its application can be found in precise initialization of the stopwatch from the starter sound, handclap or gun in competitive sport races but also in many other places. The proposed device consists of several low-cost commercially available components and it is powered by a 9 V battery. The proposed device reliably reacts on incoming acoustic shock wave by generation of explicit impulse having controllable duration. It significantly overcomes basic implementations using only a microphone and amplifier (generating parasitic burst instead of defined and distinct impulse) or systems allowing a limited number of adjustable features (gain and/or threshold of the comparator-our concept offers the adjustment of gain, cut-off frequency, threshold level and time duration of active state). In comparison with standard methods, the proposed approach simplifies and makes sensing device less expensive and universal for any powder-based starting gun (without necessity to adapt starting gun). The proposed device, among others, has the following features: impulse duration can be controlled from hundreds of mu s up to 2.3 s, the gain range of linear part of processing from 6 to 40 dB and open-collector output compatible with 5 V TTL or 3.3 V CMOS logic. The initialization has been tested in the range from tens of centimeters up to four meters. In order to highlight the important spectral components, the spectral character of the signal can be optimally reduced by a low-pass filter. The quiescent power consumption of the designed simple analog circuit reaches 90 mW. Several use cases, response of the designed system on gunshot signature, talking, hand-clapping and hit on the sensing microphone, are studied and compared to each other. Simulation and experimental results confirm functionality of the realized system